The Sanyo
PLV-60 was provided by
Click here to learn about ProjectorPeople.com
|
|
Specs for the Sanyo PLV-60HT
Resolution: WXGA (1366 x 768)
Display Device: 1.35” TFT polysilicon type x 3
Brightness: 1200 ANSI lumens
Uniformity: 90%
Data Signals: SXGA, XGA, SVGA, VGA, MAC, PC 98 compressed
Video Signals: PAL/PAL-M/PAL-N/SECAM/NTSC/NTSC4.43
HDTV compatible (1080i, 1035i, 720p, 575p, 575i, 480p and 480i)
Video Resolution: 768 video lines
Aspect Ratio(s): Native 16:9
No. of Colors: 16.7 million
Contrast Ratio: 700:1
Lamp: 250 watt
Lens: Power zoom and focus
1:1.3 Zoom
F/1.8 – 2.1; f=1.9” – 2.47”
Throw Ratio - 1.8 - 2.34:1
Image Size: 31 - 400 in. (diagonal)
Throw Distance: 4.6 to 47.2 feet
Keystone: Digital correction +/- 30°
Power Lens Shift 10º Up/Down from center
Proj. Method(s): Desktop/ceiling; front/rear
Input: Panel 1: 1 D-Sub 15; 2 RCA Audio (L & R)
Panel 2: 5 BNC (RGBHV) or 3BNC (Video/Y, C/PB/CB, Pr/Cr; 1 S-Video;
2 RCA Audio --(L & R)
Panel 3: 1 component / HDTV (RCA x 3-Y,Cb/Cr,Pb/Pr); 2 RCA Audio
(L & R)
Output: 1 External speaker – 8 ohm (Stereo Mini Jack); 2
RCA Audio (L & R)
H-Sync Range: 15-100 kHz
V-Sync Range: 50-100 Hz
Built-in Audio: Two-piece, 2-watt stereo
Audible Noise: 37 dB
Weight: 20.3 lbs.
Dimensions: 12.4 in. (W) x 18.8 in. (D) x 6.5 in. (H)
Accessories: Wired/Wireless I/R Remote Control, AC power supply
cord, Video Cable (RCA), S-Video cable, stereo audio cable, wired
remote cable, dust cover, lens cover, owner's manual.
Remote control: Wired/wireless infrared remote control
Warranty:
Mfg: Three years parts and labor; 90 days lamp; Quick Repair
Program under warranty.
Top
of Page
If you would
like to purchase the Sanyo PLV-60 or any other HDTV ready system
|
HDTV Feature based on the Sanyo PLV-60HT
